The 121-way sealed plug-in connection is suitable for the connection of control units mounted in the engine compartment. The plug-in connection consists of a 40-way module (8x JPT and 32x BMK contacts) and an 81-way module (5x JPT and 76x BMK contacts). A silicone gel seal (BMK 0.6) and individual wire seals (JPT) are used for the cable. Thanks to the gel seal, no additional sealing (e.g. dummy plugs) is required for non-used signal pins (BMK 0.6). A slide is used for pull-in and locking.
Sealed plug-in connection
For attachment to control units in engine compartment
Secondary lock
Silicone gel seal or individual wire seal
High-current and signal contacts
Vibration resistance: 6 g
Temperature range: -40⁰C…+105⁰C
Degree of protection: IP 54K, 66K, 69K
Connection cross-section: 0.5…2.5mm² (JPT), 0.35…0.75mm² (BMK 0.6)
Suitable contacts: 13x JPT with individual wire seal, 108x BMK 0.6
Contact spacing/posts: JPT - 5mm/2.8mm, BMK 0.6 - 2.5mm/0.6mm
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
