DEUTSCH DTP Series Connectors

DEUTSCH DTP Connector Benefits

DEUTSCH DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors. The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.



Flexible mounting



multi-pin arrangements

100 cycles

with no defects

DRC Connector Specifications

The DEUTSCH DRC series is a rectangular connector series that offers insert arrangements of 24, 40, 50, 60, 64, 70, and 76 cavities and accepts size 12, 16, and 20 contacts.

Featured Part Number(s)

  • Numbering System: DT* 06 - 2 S * - ****
  • 2 Position: DTM06-2S (Plug), DTM04-2P (Receptacle)
  • 3 Position: DTM06-3S (Plug), DTM04-3P (Receptacle)
  • 4 Position: DTM06-4S (Plug), DTM04-4P (Receptacle)
  • 6 Position: DTM06-6S (Plug), DTM04-6P (Receptacle)
  • 8 Position – Key A: DTM06-08SA (Plug), DTM04-08PA (Receptacle)
  • 8 Position – Key B: DTM06-08SB (Plug), DTM04-08PB (Receptacle)
  • 8 Position – Key C: DTM06-08SC (Plug), DTM04-08PC (Receptacle)
  • 8 Position – Key D: DTM06-08SD (Plug), DTM04-08PD (Receptacle)
  • 12 Position – Key A: DTM06-12SA (Plug), DTM04-12PA (Receptacle)
  • 12 Position – Key B: DTM06-12SB (Plug), DTM04-12PB (Receptacle)
  • 12 Position – Key C: DTM06-12SC (Plug), DTM04-12PC (Receptacle)
  • 12 Position – Key D: DTM06-12SD (Plug), DTM04-12PD (Receptacle)

Performance Specifications

  • Temperature: Operating at temperatures -55°C to +125°C.
  • Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.
  • Vibration: No unlocking or unmating, and no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.
  • Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications.
  • Insulation Resistance: 1000 megohms minimum at 25°C.
  • Immersion: IP68 rating.
  • Moisture Resistance: Properly wired and mated connections withstand immersion under three feet of water without loss of electronic qualities or leakage.
  • Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 volts AC.
  • Thermal Cycle: No cracking, chipping, or leaking after 20 test cycles from -55°C to +125°C.

Reference Dimensions (4 Position)

  • Plug Length: 34.65mm
  • Plug Height: 24.38mm
  • Plug Width: 22.05mm
  • Receptacle Length: 47.27mm
  • Receptacle Height: 26.62mm
  • Receptacle Width: 26.92mm

DTP Series Required Components

DEUTSCH DT connectors require separately sold secondary wedgelocks to ensure correct contact alignment. These wedgelocks easily snap into place at the mating interface and, if not initially seated properly, will lock during the connector mating process.

DTP Series Resources

DTP Series Datasheet


DT Family Datasheet


Get pricing and support

As authorised distribution partners, we’re here to help you with dedicated product support, design expertise and market-leading prices.

Get Pricing