KATKO KEF Firefighter Switch is a switch-disconnector/ isolator that is IEC Approved and manufactured from either IP66 aluminium or a polycarbonate enclosure. Also known as a Fireman Switch, according to The Regulatory Reform (Fire Safety) Order 2005, BS 7671: 2008, it can be installed on the outside of a building or in the interior of a building in the main entrance or a location agreed with the local fire authority. For example, petrol stations, shops and shopping centres, nightclubs, theatres, hotels, restaurants etc. The aluminium/polycarbonate enclosure is finished in red for clear visibility in an emergency, Firefighters use Firefighter Switches to turn off neon lighting and signage to prevent detonation and explosion. The KEF safety Firefighter Switch, provide good resistance against UV and many chemicals.
Good resistance against UV and many chemicals
Withstands high impact and has wide operating temperature
Fully rated Load Break Switch breaking capacity of 8 x AC23 rating
Cable entries: 2 x M25 as standard on the top and bottom
Large cable terminals 1.5 - 16 mm2
Mounting holes: 213.0 x 144.0
Padlockable handle in 0-position and also available in 1-position
EMC shielding with EMC glands as an option
Handle on left side
Tested according to IEC 60947-3
Please fill out the form below to access downloads.
Can't find what you're looking for or just want to speak to someone about our products?
Features include a side mounted, pole operated, ring handle which automatically locks in the ‘OFF’ position, a red metal clad IP66 rated enclosure with door interlocked cover containing a 3 or 4 pole, fully rated load break switch, 3 cable entries and padlockable handle.