Your browser is not supported.
The latest version of Safari, Chrome, Firefox, Internet Explorer or Microsoft Edge is required to use this website.
Click the button below to update and we look forward to seeing you soon.Update now
The 121-way sealed plug-in connection is suitable for the connection of control units mounted in the engine compartment. The plug-in connection consists of a 40-way module (8x JPT and 32x BMK contacts) and an 81-way module (5x JPT and 76x BMK contacts). A silicone gel seal (BMK 0.6) and individual wire seals (JPT) are used for the cable. Thanks to the gel seal, no additional sealing (e.g. dummy plugs) is required for non-used signal pins (BMK 0.6). A slide is used for pull-in and locking.
Sealed plug-in connection
For attachment to control units in engine compartment
Silicone gel seal or individual wire seal
High-current and signal contacts
Vibration resistance: 6 g
Temperature range: -40⁰C…+105⁰C
Degree of protection: IP 54K, 66K, 69K
Connection cross-section: 0.5…2.5mm² (JPT), 0.35…0.75mm² (BMK 0.6)
Suitable contacts: 13x JPT with individual wire seal, 108x BMK 0.6
Contact spacing/posts: JPT - 5mm/2.8mm, BMK 0.6 - 2.5mm/0.6mm
Can't find what you're looking for or just want to speak to someone about our products?